ARTICLE # M918-11488
PRODUCT (if applicable)
Installation Technology 530T
BYPASS MODULE (if applicable)
I've installed two 530T's in a four door vehicle. When activated to roll the windows up, all four windows roll up but move very slow. Is there a solution for this
When using the switch in the vehicle it is usually running and current draw isn't an issue. When the 530T's try to roll all four winows up, the vehicle isn't running and it can tax the battery to the point where the windows don't move at their normal speed
You can stagger the operation of the 530T's so that only two windows roll up at one time. Use the grey wire, (Output During Activation) of the first 530T to trigger a relay to open up or disconnect the orange wire, (Activation input) of the second 530T. This will keep the second 530T from rolling up the windows until the first 530T turns off after the first set of windows are completely closed.
This will cut the current draw on the battery in half and the windows will operate much closer to normal speed.
IMPORTANT NOTERelated Vehicle: 0
This article requires an advanced understanding of the installed system. Please contact your local Authorized Directed Dealer or Retailer if you require additional assistance.