ARTICLE # M921-10322
PRODUCT (if applicable)
Installation Technology 529T
BYPASS MODULE (if applicable)
I've installed two 529T's in a four door vehicle to roll all of the windows up. When activated all four windows roll up but move very slow. Is there a solution for this
When using the switch in the vehicle it is usually running and current draw isn't an issue. When the 529T's try to roll all four winows up, the vehicle isn't running and it can tax the battery to the point where the windows don't move at their normal speed
You can stagger the operation of the 529T's so that only two windows roll up at one time. Use the grey or grey/black wire, (Output During Activation) of the first 529T to trigger a relay to open up or disconnect the orange and orange/black wires, (Activation inputs) of the second 529T. This will keep the second 529T from rolling up the windows until the first 529T turns off after the first set of windows are completely closed.
IMPORTANT NOTERelated Vehicle: 0
This article requires an advanced understanding of the installed system. Please contact your local Authorized Directed Dealer or Retailer if you require additional assistance.